Ferrous Crete is a leading manufacturer of Polymer modified adhesives in India. The company is primarily located in Faridabad, Haryana.

© Copyright Ferrous Crete 2019
ferrous

FERRO – 700 GYPSUM PLASTER (PLATINUM PLASTER)

Ferro – 700 Gypsum Plaster is a gypsum based plaster suitable for application on all internally lined surface like Brick, Block Cement Sand Plaster, Old Scrap Surface and Rcc Surface*. This ready mix plaster is an improved and finer grade of hemihydrates to which additive are further added to give excellent bonding, smooth finish, good workability and setting characteristics. It contains special additives which makes it expand when heated to a temperature sufficient to soften it and improve plasters workability, coverage and application. The finish wall requires minimum surface preparation before painting. Ideal for use in green building.

CATEGORY: Gypsum Plaster

  • Description

    APPICATIONS

    Suitable for application on all internally lined surface like Brick, Block Cement Sand Plaster, Old Scrap Surface and RCC Surface*

    ADVANTAGES
    • Smooth finishing
    • Excellent bonding
    • Strong and durable
    • High coverage
    • High strength
    • Premium quality
    • Direct application
    • High purity gypsum
    • No shrinkage and cracks
    • No wastage
    • No maintenance
    • Saves time
    • Easy to use
    • Cost saving
    • Ever lasting
    • Environment friendly
    • Better Aesthetic value
    • Sets gradually
    • It gives an white coloured finish surface.

  • Technical Data

    Technical Specification Data
    Application Background Brick, block, RCC & Concrete surface with normal suction background
    Advantages Specially formulated for strong bonding & good strength,
    lower density and gradual setting with no shrinkage cracks.
    Colour of finished Surface white
    Packaging Available in 25 kg HDPE/PP bags.
    Dry Bulk Density (Kg / m) Approx. 600 – 700
    Setting Time (minutes) Approx. 25 – 35
    Coverage at 13 mm Bed Thickness
    2
    (m
    / 1000kgs)    		 Approx.
    88 – 92
    Surface Smoothness Silky finish surface
    Workability Easier
    Compressive Strength (Kg / cm
    )    		 Approx.
    40 – 50

    * RCC Surface : Use Ferro – 400 Gypso Bond before plastering.

  • Coverage Area

    Approximate coverage is 88 – 92 Sq. Mtr./1000 kg at 13 mm bed thickness.

  • Additional Information

    • Pack Size : 25 Kg.

  • PRODUCT MIXING AND APPLICATION

    • Mix plaster as much as required depending on working area
    • Mixing of plaster has to be done in clean container
    • Add 1 part of water and 2 part of plaster
    • Through mixing is to be done till a consistent paste is formed
    • Single coat should not exceed 10 mm in thickness, if higher thickness required then Ferrous Crete plaster to be applied in multiple coats
    • Painting can be started only after complete drying
    • Partially used material to be kept in well secured dry place.
    Precautions

    Care should be taken to avoid dust inhalation while mixing and handling powder. In case of contact with eyes or mouth, wash with plenty of water. Keep out of reach of children. Store in cool and dry place.

  • How to Use Video

Related Products