Ferrous Crete is a leading manufacturer of Polymer modified adhesives in India. The company is primarily located in Faridabad, Haryana.

© Copyright Ferrous Crete 2019
ferrous

FERRO 5111

Three Component Epoxy Floor Coatings

It is a three component epoxy floor coating system comes in appropriate quantities to mix completely on site before use. It provides hard & flexible surface floor coating having excellent adhesion to substrates of concrete, metals, etc. It provides easily cleanable impermeable surface with semi-glossy finish.

CATEGORY: Industrial Flooring

  • Advantages

    • Excellent durability.
    • Highly resistant to industrial chemicals.
    • Economical – low maintenance costs
    • Easily cleanable keeps it hygienic
    • Attractive appearance – available in several colors.

  • TECHNICAL DATA

    The following values were obtained when tested @ 27°C

    • Pot life
    • : 2 hours
    • Tack free time
    • : 4-6 hours
    • Time between coats
    • : 6-24 hours
    • Initial hardness
    • : 24 hours
    • Full traffic use after
    • : 48 hours
    • Pull off adhesion strength
    • : > 3MPa
    • Full cure
    • : 7 days
    • Wet film thickness @ 1coat
    • : 100 microns
    • Total dry film thickness @ 2 Coats
    • : 90 microns
    • Mixed density
    • : 1.273 g/cc
    • Abrasion Resistance
    • : 0.1 mg/cycle loss of weight (with CS 17 wheel of 1000g weight)
    • Adhesion Strength
    • : > 2.5 N/ mm²
    • Tensile Strength
    • : >15 N/ mm²
    • Tensile Modulus
    • : >2500 N/ mm²
    • Elongation
    • : >0.8%

    Note: After the pot life has expired, the material, although not hardened, increases in viscosity and the characteristics of the product change. Excess material should be discarded after this point.

  • Coverage:

    10m2/litre @ 100 microns wet film thickness per coat. Coverage may vary due to nature of substrate and wastage factor.

  • Pack Size:

    4.5 ltrs

  • SHELF LIFE

    12 months from the date of manufacturing

Related Products