Ferrous Crete is a leading manufacturer of Polymer modified adhesives in India. The company is primarily located in Faridabad, Haryana.

© Copyright Ferrous Crete 2019
ferrous

FERRO 5113

Three Component Epoxy Floor Coatings

Ferro 5113 is a three component epoxy floor coating system consists of base, hardener & color pack that comes in appropriate quantities to mix completely on site before use. It provides hard & flexible surface floor coating having excellent adhesion to substrates of concrete, metals, etc. It provide easily cleanable impermeable surface finish.

CATEGORY: Industrial Flooring

  • Advantages

    • Excellent durability
    • Highly resistant to industrial chemicals
    • Economical – low maintenance costs.
    • Solvent free odourless application.
    • Available in different textures and hence slip resistant.
    • Attractive appearance – available in several colors.

  • TECHNICAL DATA

    The following values were obtained when tested @ 27°C

    • Pot life
    • : 25 minutes
    • Cure time
    • : 24 hours maximum time
    • Between coats
    • : 36 hours
    • Light traffic use after
    • : 24 hours
    • Full traffic use after
    • : 48 hours
    • Resistance to chemical spillage
    • : 7 days
    • Compressive strength
    • : 70 N/ mm²
    • Flexural strength
    • : 40 N/ mm²
    • Tensile strength
    • : 20 N/ mm²
    • Water absorption
    • : 0.07%
    • Shore D Hardness
    • : > 80
    • Abrasion Resistance
    • : 0.1 mg/cycle loss of weight (with CS 17 wheel of 1000g weight)
    • VOC Content
    • : NIL

  • Coverage:

    5m2/litre @ 200 microns wet film thickness per coat. Coverage may vary due to nature of substrate and wastage factor.

    Antislip texture – 4 m2 /litre @ 250 microns wet film thickness per coat.

    Coverage may vary due to nature of substrate and wastage factor.

  • Pack Size:

    4.5 ltrs

  • SHELF LIFE

    12 months from the date of manufacturing provided the temperature should be in between 20C and 50C

Related Products